Payment & Shipping Terms:
|Spindle Speed:||12000 RPM||Fast Traverse Speed:||48m Per Minute|
|Spindle Taper:||BT40||Positioning Accuracy:||0.004/300mm|
|Spindle Brand:||Taiwan Brand||Guide Way:||Taiwan HIWIN|
High Efficiency 3 Axis CNC Machining Center Optimum Finishing Surface
3 Axis CNC Machining Center Features:
Taesin CNC Machining Center has the advantages of high speed and high precision performance when doing any machining applications. The Meehanite rigid and reinforced body design can guarantee no vibration and no deformation at high speed machining. So the machine performance can be kept in good condition, and the machine can be used for a long term. The whole machine structure is completely reinforced with rib-structure design and FEM analysis.
Taesin CNC Machining Center can also make good finishing surface, with the help of high speed direct drive spindle (10000 or 12000 RPM)and Taiwan Brand linear way, which also can increase the productivity.
For improving the machine performance, we had already thrown away the out-of-date design and features. And we use linear ways for all the guideways, which comes from Taiwan HIWIN. The machine damping features can also be compatible with the finish and repeatability. At the same time, we use direct drive design to erase the blacklash.
Taesin 3 Axis CNC Machining Center Special Characteristics:
Meehanite casting with internal ribs running throughout each section: High rigidity, 30% Stiffer than traditional, Stability and Vibration-resisitance;
All structural mating surfaces are precision hand scraped: to increase flatness and to improve geometric accuracy;
Rigid and high-performance spindle from Taiwan;
Integrated casting structure base: no oil leakage;
X/Y/Z Axis: Taiwan Class P linear guide way; X/Y Axis: ball linear guide way; Z Axis: roller linear guide way;
Spindle High Speed: 12000rpm;
Tool Storage: BT40/24
Back-type chip conveying system to save space;
Special machine column design to ensure the stability when doing high-speed traverse;
Faster Tool Change: 2.0S (20T tool storage)
− Heavy Duty, robust designed machine
− High driving powers
− High travelling speeds
− Accurate and fine finish
− High safety standards
− User friendly and reliable operation
− Designed with the most practical experience
−International service offered by Taesin
Taesin 3 Axis CNC Machining Center Quality Control:
Inspection and acceptance can be done after testing in manufacturer’s factory. Geometric and positioning accuracy inspection, and do machining on spot. Make sure the processing accuracy and range meet technical requirement. Machine can be delivered after both of seller and buyer sign.
The machine is also inspected by our advanced engineers using the laser interferometer for the positioning deviation&repeatability according to the highest standard. The machine is also checked for its geometrical accuracies before delivering.
The CNC Horizontal Machining Center is also tested in our company with the related workpieces and required tool. And in the process, our engineer also fully inspected the testing process and achieve the highest precision.
Before delivering, we also verify all parameters against machine specification and technical data. Machine will run continuously for 8 hours at full rated parameters. After the running test, the machine should be under perfect working condition. After installation and commissioning, we guarantee that positional and geometrical accuracy values will be verified.
3 Axis CNC Machining Center Features Core Components Brand:
CNC Control System: Mitsubishi, Fanuc or Germany Siemens
3 Axis Motor Brand: Mitsubishi, Fanuc or Siemens
Spindle Brand: Taiwan
Guideway Brand: Taiwan HIWIN and PMI Guideway and Ball Screw
Bearing Brand: NSK
3 Axis CNC Machining Center Technical Data:
|X/Y/Z Axis Travel mm||600/400/420||800/500/500||1000/600/600|
|Working Table Size mm||420*700||450*900||600*1300|
|Max Load (KG)||300||500||800|
|Spindle Tool to Working Table mm||
|Rapid Traverse Speed m/min||48||48||48|
|Cutting Feed Rate mm/minute||1-12000||1-12000||1-12000|
|Spindle Motor KW||5.5||7.5||11|
|Spindle Speed rpm||10000/12000||10000/12000||10000/12000|
|Positioning Accuracy mm||±0.004/300||±0.004/300||±0.004/300|
|Repeated Positioning Accuracy||± 0.003mm||± 0.003mm||± 0.003mm|